Installation method of gymnasium sound-absorbing board material:
1. Measure the size of the wall, confirm the installation position, determine the horizontal and vertical lines, and determine the space reserved for wire sockets, pipes and other objects.
2. Calculate and cut out part of the sound-absorbing panels according to the actual size of the construction site (if there are symmetrical requirements on the opposite side, especially pay attention to the size of the cut-out part of the sound-absorbing panels to ensure symmetry on both sides) and lines (edge lines, outer corner lines, connections lines), and are reserved for wire sockets, pipes and other objects to be cut out.
3. Install sound-absorbing panels:
(1) The installation sequence of sound-absorbing panels follows the principle of left to right and bottom to top.
(2) When the sound-absorbing panel is installed horizontally, the notch is upward; when it is installed vertically, the notch is on the right side.
(3) Some solid wood sound-absorbing panels have requirements for patterns, and each facade should be installed in order from small to large according to the numbers prepared in advance on the sound-absorbing panels.
Gymnasium sound-absorbing panels are also rich in types, including B1-level fire-resistant wooden sound-absorbing panels (groove wood sound-absorbing panels, perforated wood sound-absorbing panels), as well as A1-level glass-magnesium sound-absorbing panels and ceramic aluminum perforated sound-absorbing panels according to design requirements.
Post time: Apr-02-2022