How to install wooden sound-absorbing panels to achieve the best sound-absorbing effect? This problem has been annoying many construction workers, and some are even wondering whether it is the problem of sound-absorbing panels. In fact, this has a great impact on construction and installation. It directly affects the sound-absorbing effect of the sound-absorbing panel and makes the sound-absorbing panel ineffective. The following are the specific requirements for the installation of wooden sound-absorbing panels:
1. Storage requirements before installing wooden sound-absorbing panels: The warehouse where the wooden sound-absorbing panels are stored must be sealed and moisture-proof. The protection box must be opened for at least 48 hours before installing the wooden sound-absorbing panels so that the product can achieve the same environmental characteristics as the installation site.
2. Requirements for the installation of wooden sound-absorbing panels: the installation site must be dry and reach the specified temperature and humidity standards at least 24 hours before installation. The minimum temperature required for the installation site is 15 degrees, and the maximum temperature change after installation should be controlled within 40-60 Within %.
3. Installation method of sound-absorbing board for wall:
(1) Install the light steel keel to the wall first.
(2) The façade size of the wall-mounted light steel keel is 18*26*3000mm long, and the separation distance is 60cm.
(3) Install the clasp with a size of 45*38*5mm between the keel and the sound-absorbing board.
(4) The glass wool covering the back of the sound-absorbing panel: thickness 30-50mm, density 32kg per cubic meter, width and length 600*1200mm.
4. Precautions for wooden sound-absorbing panels (wall):
(1) The recommended spacing between the dragon frame grilles is 60cm.
(2) When multiple wooden sound-absorbing panels are installed in the combination of the panel and the panel, there should be at least a 3mm gap between the panel head and the nail of the panel head.
(3) If the sound-absorbing panels are installed horizontally from the ground, the unevenness of the long side should be installed downwards and locked with cleats, and then the other sound-absorbing panels should be installed one by one.
Post time: Oct-27-2021