The sound effect required by the theater is very perfect, so the selection of sound-absorbing panels in the theater should follow the rule of controlling the reverberation time at about 1.5-2.8 seconds, and the specific reverberation time should be determined by the volume of the hall. At the same time, sound-absorbing panels in theaters should use appropriate sound-absorbing materials.
Of course, a better reverb time has to do with the theme and style of the piece. For classical music, the best reverb time is 1.6-1.8 seconds, for romantic music, the best reverb time is 2.1 seconds, for modern music, you can control the reverb time to 1.8-2.0 seconds, 125Hz and 250Hz. The reverberation time is 1.9Hz to 500Hz mid frequency.
Therefore, when choosing an acoustic panel for a theater, you can also consider the fact that reverberation time is common to musical themes and styles. The reverberation time of theaters is high, so the use of sound-absorbing materials, such as theater sound-absorbing panels, which are mainly used for reflection, should be minimized to improve surround sound quality. Because the ceiling above the theater’s music platform is usually higher in order to
To enable early reflection for musicians and audiences, the reflector should be suspended above the music platform. The suspension height of the reflector shall not exceed 6-8m. Background noise in theaters is generally much lower than in the NC-20, so installing sound absorbing panels in theaters can solve this problem.
Post time: Mar-02-2022