The sound-absorbing panel in the computer room is a special sound-absorbing panel installed to eliminate the noise of the machine in the computer room. Including a variety of types Let’s take a look at what are commonly used?
1. The perforated sound-absorbing composite board is characterized by adding a cavity between the perforated panel and the bottom plate, and three layers of sound-absorbing to achieve a good sound-absorbing effect. Common specifications 600*600*15mm,
The construction process is to paste directly on the top surface of the wall. Due to the low cost and easy installation, it can be used for sound absorption in the basement machine room and is also a special sound-absorbing board for elevator shafts.
2. The “new type board” of perforated sound-absorbing composite board,
It achieves a 2-layer composite sound-absorbing effect through the perforated panel and the rear-attached sound-absorbing panel.
The general specification is 600*600*15mm, and the installation method is also directly pasted on the top surface of the wall. The cost is slightly higher, and it is only suitable for sound absorption in the basement room.
3. Mineral wool sound-absorbing board, also known as mineral wool board, can be used for office ceiling or sound-absorbing in computer room.
Because it is a single-layer sound-absorbing, in order to improve the sound-absorbing effect, it is generally used in the computer room with light steel keel and glass wool, and installed together, but the cost is much higher than the first two.
4. The aluminum gusset is characterized by good sound absorption, beautiful completion, and long use time. The disadvantage is that it is expensive and rarely used.
Post time: Mar-16-2022